home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
QRZ! Ham Radio 8
/
QRZ Ham Radio Callsign Database - Volume 8.iso
/
mac
/
files
/
p_msys
/
mopt116.exe
/
USERMAN.DOC
< prev
Wrap
Text File
|
1993-12-04
|
60KB
|
1,219 lines
THE WA8BXN MSYS PACKET BULLETIN BOARD SYSTEM
USER'S MANUAL
By Steve Wolf, NO8M @ NO8M.#NEOH.OH.USA.NA
December, 1993
Version 1.16
Please copy it and pass it around!
(Keep the credits and trademark notice!)
Additions, corrections and suggestions:
Steve Wolf, NO8M
27132 Butternut Ridge Road
North OLMSTED, OH 44070-4417
NO8M @ NO8M.#NEOH.OH.USA.NA
MSYS is written by Mike Pechura, WA8BXN, and is copyright 1993 by
HUB COMPUTERS, INC. It is distributed free for amateur use and
can be obtained by various means including the Cleveland Hamnet
BBS in Cleveland, Ohio
(216-942-7516 - 9600/2400/1200 baud - RBBS).
WA8BXN MSYS PBBS User's Manual
Version 1.16 December, 1993
Page 1
THIS MANUAL
This manual is intended to be a reference to the many
commands available in the MSYS PBBS. It will not teach you how to
operate the board efficiently, you will have to experiment with
it. It will give you the tools to experiment.
COMMON ERRORS
The misspelling of a file name you are attempting to
download is one of the most often observed errors. The improper
use of subdirectories is a close second.
The use of the wrong command is another "most often made".
If you find yourself in a bind, check the command description in
this manual.
Another common problem is attempting to use the nodes
without giving a port number. You must give a port number to
connect from the nodes.
Any traffic moving off the board should be signed with your
call and your home PBBS, like this: "KA8ZVV @ NO8M.OH.USA.NA"
A send to a station must contain the exact callsign of the
person you want the message to go to. If you send a message to
KA8ZZV rather than KA8ZVV, your station will never get the
message.
The sysop is more than happy to answer your questions.
Please don't hesitate to leave a message to the call of the PBBS
asking about your problem!
PRINTING THE MANUAL
The manual can be printed by using the DOS command
TYPE USERMAN.DOC > PRN
KA-Node, KAM and KPC-4 are trademarks of Kantronics, Inc.
NET/ROM is a trademark of Software 2000.
IBM is a trademark of International Business Machines Corp.
WA8BXN MSYS PBBS User's Manual
Version 1.16 December, 1993
Page 2
STRUCTURE
MULTI-USER/MULTI-TASKING
The board is a multi-user system. Many stations can be
connected at once. It will support many connects on many bands.
This is normally transparent to the user. However, during
prime time, you might observe some slowing. Even if you hear
nothing on your frequency, the board might be up to its ears in
tasks on other frequencies. Disk reads and writes will also slow
a response.
HOUSECLEANING
The board will automatically kill messages after a certain
time period. Decisions about what is kept and what is killed are
made by the sysops. Should you be out of town for a long period
of time, you might ask the sysop to hold your mail.
BACKUPS
Every message gets copied to a backup file. Should the board
crash, the messages can be restored. If a message that you have
already read and killed suddenly reappears, it may have been
restored after a crash.
The board is very stable if run with a conservative
attitude. Normally sysops will tweak and tune to get optimum
performance. They will experiment with other ports. They will not
act conservatively.
SECTIONS
There are four basic sections. There is a message section, a
download section, a TCP/IP section and a user services section.
The message section is capable of delivering mail and bulletins
almost anywhere in the world. The download section contains
information held for reference and training. The service section
provides a node and conference that enhances the value of the
software. Send a message to the callsign of the PBBS for more
information on the TCP/IP section.
WA8BXN MSYS PBBS User's Manual
Version 1.16 December, 1993
Page 3
THE SERVICES SECTION
The Conference
K-Node
Network Node
THE CONFERENCE
Normally, only two amateurs can connect via packet radio and
hold a conversation. Three or more can talk in the converse mode
but will be forced to disregard all other traffic on the channel.
MSYS provides a means by which any number, depending on channel
congestion, can talk.
To enter or start a conference, you must connect to the
PBBS. From there you issue the conference command. Every packet
you send will be received and acknowledged by the board. It will
then send your packet and receive acknowledgement from every
other user.
The first packet received from a user will be prefaced by
the user's callsign. If the next packet sent is from the same
person, the callsign is not included.
Overhead (channel usage) is very high for a conference.
However, if the local area network (LAN) is on a clear channel,
it will support many users.
You might be asked to join in a conference. Do it! If you
get a message that says that someone would like you to join a
conference, type the letter C.
THE K-NODE
MSYS provides the user with two types of nodes. An
explanation of what a node is and how it operates can be found in
most download sections. For now, suffice it to say that a node
acts somewhat like a repeater, extending the range of another
packet station.
One MSYS node is called a K-Node and operates much like the
Kantronics KA-Node. They may also provide digipeating and gateway
service.
To use the K-node, you must first connect to it. It will
have a different callsign than the PBBS and will normally use an
alias. The ID command, described later, will let you know the
call of the K-Node.
WA8BXN MSYS PBBS User's Manual
Version 1.16 December, 1993
Page 4
The following K-Node commands are available:
Bye ------- This is used to disconnect from the K-node.
Connect --- This command allows the user to connect to
another station. Two additional items, a port
number and a callsign are necessary. They MUST be
included. The ID command, described later, will
tell you what port number is attached to what
frequency.
C# call -- Connect on port # to call, PORT NUMBER IS
REQUIRED!
Help ----- Help.
Just Heard ----- What stations the K-node has heard.
This list is much more limited than the command
on the PBBS. It will also take an operand port
number.
Node ----- This lists K-Nodes heard and will take a
port number operand.
THE NET NODE
The NET NODE is different from the K-Node in that the node
listens to the frequency and logs what it hears. If it hears
another node, it logs that node as a "route", a node that it can
directly connect to. It also logs the nodes that route can hear.
It compares the other nodes with what is in its log and figures
out the best path to a destination.
NET NODES only talk to other NET NODES, NET/ROM nodes,
TheNet nodes and other versions of the network nodes. They will
typically have a callsign with SSID and an alias. Many have
rather strange numbers as alias names. This number represents
the node's identifier when used with the TCP/IP protocol.
WA8BXN MSYS PBBS User's Manual
Version 1.16 December, 1993
Page 5
The following network node commands are available:
BBS --------- Connect to the bulletin board.
B<ye> ------- Disconnect
C# ---------- Connect on port # to call (# is unnecessary
for known nodes)
C<onnect> --- name or call --- for known nodes
H<elp> ------ Help
I<nfo> ------ Basic information about the node
K<Node> ----- Lists the K-Nodes that are known
J<ustheard> - What has been heard (a limited output)
N ----------- Lists the network nodes that are known
N call ------ Information about a specific node
P<orts> ----- The port numbers of the node and the PBBS
R<outes> ---- To nodes that can be directly connected to
R call ------ Routes from a particular node
T<alk> ------ Page the Sysop
U<sers> ----- Info on the users and node connected to the
MSYS node.
THE MESSAGE SECTION
This is the meat of the board. Messages from user to user
and bulletins appear here. The board is capable of routing
messages to almost anywhere in the world. The bulletins carry
information that you may not otherwise see until the magazines
come out.
CITY, STATE and ZIP
If you are entering a message for another party and the
route has not been proven by a number of other messages that have
made the trip, please put the City, State and Zip code in the
title line of the message. It will really help the routing of
your message should it get hung up somewhere.
HIERARCHIAL FORWARDING (Routing Messages)
This is not near as complicated as you might think! As an
example, let's say that your friend in Tahiti, French Polynesia,
wants to send you a message. The local PBBS might not know that
NO8M is in Ohio. It might not even know how to get traffic into
Ohio. However if the message is sent like this: SP WB8RNI @
NO8M.OH.USA.NA the message should have no problem.
The local board will look at the @PBBS line and see if it
knows how to route to NO8M. If it does not, if will look at the
OH to see if it knows how to get traffic into Ohio. If that
fails, it will see if it knows about the United States. If
nothing else, it had better know about North America!
WA8BXN MSYS PBBS User's Manual
Version 1.16 December, 1993
Page 6
See, nothing to it! Your PBBS knows all about the PBBSs in
your state. In fact, you can verify in-state traffic will be
routed by using the PF command. The board will come back and say
to where your traffic will be sent. In the United States, your
PBBS should recognize a PBBS callsign and respond with a routing
like KY.USA.NA.
If it does not, and you are SURE that the @PBBS given is a
forwarding PBBS, then you may send it by adding a two letter
state abbreviation after the @PBBS call. In this way, MSYS will
send the traffic to a forwarding PBBS in that state and let that
board figure out what to do with it.
For international traffic that you are not sure of, please
send a message to the call of the PBBS and inquiries will be made
in order to obtain the proper routing.
DATABASE
MSYS has the facilities to maintain a number of simple
databases. Adding to a database is done like this:
Line entered Explanation
============================ ============================
SP MSYS @ thatbbs A message to the PBBS.
DBA 3 (title line) Add to database
#3.
wind damage, Mentor, Ohio \ The "\" character
large tree down at 615 & 20 \ causes one line after
reported by Mentor PD \ it to be listed
A no injuries with the original line.
/EX "/ex" to end.
Now if a search (GREP) on database number three were used on
the string "Mentor, Ohio", all four lines of the message would be
sent. GREP can be used on all files ... PBBS lists, club
rosters, hazardous materials lists, etc.
WA8BXN MSYS PBBS User's Manual
Version 1.16 December, 1993
Page 7
MSYS COMMANDS
Abort ------- This command stops the PBBS from what it is doing.
For example, you have asked it to list all the
messages. After about 300 messages you decide you
have had enough! Issue the Abort command. It
also works with reading messages, downloads, etc.
Bye --------- This disconnects you from the PBBS. It resets your
statistics, too. If you just disconnect or go
away without disconnecting, the PBBS will assume
you ran into trouble and log the disconnect. For
example, on Monday you check-in and read all the
new messages. You then disconnect without using
the Bye. Then, you check in on Tuesday. You
issue an L (list since you were last on). Since
the PBBS ignored your Monday connect, you will get
the messages since you last checked in and the
messages you read on Monday. Now, had you used Bye
on Monday, your Tuesday check-in would have given
you just the new messages.
Conference -- The conference allows as many users as desired to
connect with each other. The best way to
understand it is to try it with a friend. The
first time you talk, your line that is sent will
be prefaced with your callsign, like this: NO8M:
If the next line does not have a callsign in front
of it, then it came from the same station. Inside
the conference you can use the following commands
(send a control-Z by pressing and holding the
CONTROL key while tapping the Z. Release both.
/ex ---- To return to the PBBS (or ^ZQ)
^ZH ---- Help
^ZU ---- List users and their channels
^ZA # -- Ask user on channel # to join conference
Download ---- To download a file. You must enter the full name
and directory that you obtained from the What
command or from a list describing what is
available that is sometimes available. To
download a file in a subdirectory, use this: D
subdirectory/filename. So, to download the file
APPLICAT.INF in the NCARC directory, you would
issue the command
"D NCARC/APPLICAT.INF".
WA8BXN MSYS PBBS User's Manual
Version 1.16 December, 1993
Page 8
Grep -------- This command searches a file for a given set of
characters. First just enter a G. The board will
ask for a filename. It is asking for something in
the download section, that you get with the What
command. It will then ask you for the string you
want to find. Let's say you want to search
NCBYLAWS.DOC for the string "election":
G(ENTER)NCBYLAWS.DOC(ENTER)election(ENTER). The
board will then send you all lines that have
"election" in them. The command does not
recognize wildcards (*/?). If you do not specify
a file, the default of DATABASE.0 will be used.
Help -------- A short list of commands.
?x --- A longer explanation of the command, use ?x
where x is the name of the command. I would
use the command ?L to get help on LIST.
Info -------- This gives information on the system's hardware.
ID ---------- This gives you the callsigns, ports and other
information connected.
Just heard -- This gives information about stations that the PBBS
has heard. If the call is a funny alias, the
sponsor's call is given inside the curly brackets.
If you want to connect to someone like that, don't
use the sponsor's call, use the alias. Use the
Path command to determine how stations were
connected to the PBBS. You can also limit the
output with a channel number, like this: JK 0 ...
this lists all KA nodes heard on port 0.
JB -- BBSs
JD -- Digipeaters
JG -- Gateways
JK -- KA nodes
JM -- Other MSYS PBBSs
JN -- NET/ROM nodes
JT -- TCP/IP protocol stations
Kill -------- This deletes messages. You may kill a number of
messages at the same time: K 2 34 556.
KM -- Kills messages addressed to you.
KT -- Kills NTS traffic you are going to deliver.
WA8BXN MSYS PBBS User's Manual
Version 1.16 December, 1993
Page 9
List -------- List is used to give you the headers of the
messages. Used alone, it will list all messages
since you last logged off with the Bye command.
The PBBS has a function to force all personal
messages to end up as private messages. If this
is on, any message sent except bulletins are
changed to private.
L ---------- List since last logged off with B.
L catagory - List for a single catagory.
LC --------- List categories (TO fields).
LM --------- List mine, messages addressed to you.
LN --------- Lists messages not yet read.
LT --------- Lists NTS traffic messages.
LL --------- List the last message entered.
LL # ------- Last # messages.
LO yymmdd -- List OLDER than yymmdd.
LU --------- Lists unread messages to you.
LY --------- Lists messages that have been read
LW --------- Lists weather messages (type W$).
L< call ---- Lists messages from call (or alias).
L> call ---- Lists messages to call (or alias).
L@ call ---- Lists messages with call as an @BBS.
L x -------- Lists messages since a given number.
To see them all, use L 0.
L x y ------ List numbers between numbers x and y.
L"string" -- Lists messages with the character
string you specify in the title.
The quote marks are required. This
is case insensitive, "Yaesu" will
match "YAESU", "yaesu", etc.
L'string' -- Lists messages with the character
string you specify in the title.
The single quote marks are
required. This is case sensitive,
"Yaesu" will not match "yaesu".
L$ --------- Lists type $, list bulletins.
Message ----- This will send the message of the day. This message
contains information on happenings. It will be
sent on the initial check in UNLESS you have
selected the eXpert mode. If you have, you must
use M to read it. Expert users DO NOT get the
message of the day!
WA8BXN MSYS PBBS User's Manual
Version 1.16 December, 1993
Page 10
Name -------- This command is used to register with the PBBS.
N --- Your first name with only the first letter
capitalized.
NQ -- Your QTH, for example: North Olmsted, OH.
NZ -- Your zip code (only the five digit code).
NH -- Your home PBBS, where you want to pick up
mail addressed to you. Traffic may
arrive to you on other boards in your
area, you may want to declare your home
PBBS on those. If you change this, make
sure you do it on all boards you have
checked into And only declare one PBBS
as your home PBBS. Otherwise, your
message may end up as the potato in a
game of hot-potato. One board
forwarding to another and back again.
Declare only one home PBBS. NH should
be a full service PBBS, not a TNC PBBS.
Path -------- This command will tell you if the PBBS knows how to
route traffic to a PBBS or if the PBBS knows the
amateur.
P call -- If the person is known, information
that was entered is displayed.
This is a good way to find out
someone's name, their last connect
and where their traffic will be
sent. A response that indicates
that the person did not enter a
home board and has not checked-in
for a long time would indicate a
message left for them might not be
received.
PF call - This is used to indicate if the PBBS knows how to
route traffic to another PBBS. If this PBBS does
not know how to route to the PBBS of interest, you
can insure routing by adding a two letter state
abbreviation to the end of the PBBS call:
KA8ZVV.OH. If you are routing traffic to a PBBS
in Ohio and this PBBS does not know it, leave a
message for the sysop.
PC call - If there is a callbook (REQQTH) server enabled at
the PBBS, this command can be used to obtain
information about a callsign from the callbook.
WA8BXN MSYS PBBS User's Manual
Version 1.16 December, 1993
Page 11
Read -------- This is used to read messages on the board. Many
messages may be strung together: R 1 45 68.
Wildcards are supported: R> DX* will read
anything starting with "DX".
R@ call - Read messages having a certain @BBS.
R> xxxx - Read messages to xxxx TO field.
R< xxxx - Read messages from xxxx in FROM field.
R cat --- Reads all messages in catagory.
RE ------ The read for export. This reads the
message in a format where it can then be
easily uploaded into a PBBS or mail
drop.
RH ------ The read with headers. This shows the
forwarding headers that are added at
each PBBS as the message is sent. The
routes are not the same at all times and
it can be fun to see how a message got
from tither to yon. If a message author
did not give the home PBBS for a return
reply, use this to determine where the
message originated. Normally, that PBBS
can be tried for a response.
RN ------ This reads only the text of the message
and is a good way to save time on a
marginal path.
RM ------ Reads unread messages addressed to you.
RP ------ Reads a message without marking it as
having been read so it will be listed
the next time you check in.
WA8BXN MSYS PBBS User's Manual
Version 1.16 December, 1993
Page 12
Send -------- This is used to send a message. The basic format
is Sx call @PBBS. Sx is a send with the type of
message it is. The @PBBS is the location where
the addressee picks up their mail. Call is the
exact callsign of the recipient. If you make a
mistake on the addressee's call, the message will
probably end up in limbo, never to be received.
(control-A) -- Aborts the message; to start over.
CC callsign -- This causes a copy of a message to
be sent to the calls following the
carbon copy command. The CALLSIGN can
t a k e t h e f o r m
CALLSIGN1@PBBS;CALLSIGN2@PBBS etc. to
send the same message to many users.
REPLY # -- Allows the PBBS to automatically
address a message replying to another
message. If you add a period after the
message number, like this: "REPLY #.",
the PBBS will also automatically enter a
title for you.
SP ------- A personal message listed or read by
addressee and author.
SR # -- Allows the PBBS to automatically address a
message replying to another message. If
you add a period after the message
number, like this: "REPLY #.", the PBBS
will also automatically enter a title
for you.
ST ------- NTS Traffic. Most boards have a help
file -- READ IT!
SB ------- Send a bulletin. Without an @PBBS,
these will stay on your PBBS and may be
addressed in whatever way you wish. For
example, in northern Ohio, when sending
a bulletin, the @PBBS field may be set
to the following:
WA8BXN MSYS PBBS User's Manual
Version 1.16 December, 1993
Page 13
WW -- To quote Jim, WK8G, messages addressed
to ALLBBS are, "intergalactic,
omnipresent, transuniversal All Points
Bulletins"! This message would go to
every PBBS in the world. PLEASE USE
THIS WITH CAUTION. The packet network
in Guam does not want to know about your
wattmeter for sale!. Some areas use WW.
ALLUS -- This would go to every PBBS in the
U.S. USE WITH CAUTION as your for sale
would normally NOT be in the proper
forum if sent in this manner!
OKIPN -- (Or your wide area flood route)
Ohio, Kentucky and Indiana. Again, a
message to NEOH or ALLOH is better!
ALLOH -- All Ohio (or ALLMI, ALLHI, etc.).
NEOH -- (Or your local area flood route)
Northeast Ohio. This is the best
routing for the "for sale" messages.
PBBSCALL -- For all at a PBBS.
Talk -------- Page the sysop.
Users ------- Gives the current users of the system and the
number of messages. If you want to talk to
someone using the board, you may want to start a
Conference and invite them in.
Version ----- The version of the software and the date it was
last started.
What -------- This gives a list of what is available in the
download section.
W subdirectoryname -- Gives a list of what is in
the subdirectory. W NCARC or W AMSAT/BULLS
are examples.
WA8BXN MSYS PBBS User's Manual
Version 1.16 December, 1993
Page 14
Xpert ------- This sets and resets your expert status. As an
expert, you get a short command prompt and do not
receive the message of the day.
X x -- Where x is a number, sets the number of
lines you receive before the PBBS stops and
asks you if you want "More?". Setting this
to zero defeats the "More?". Answering the
"More?" with a C defeats it for that message.
XC -- Toggles the listing of catagories when
connecting to the BBS while in non-eXpert
mode. In eXpert mode you never get the
automatic catagory listing.
XF -- Sets the PBBS to send you multiple lines.
Use this with a good route.
XR -- Toggles the automatic question asking if you
want a reply to the message you just read.
This can be useful if you get a lot of
personal mail.
XS -- Sets the PBBS to send you one line at a
time. Use this with a poor route.
Yapp -------- This command allow you to download a binary file
from the YAPP directory. You may also upload if
you have been authorized.
YW -- What is in the YAPP directory.
YU -- Upload a file to the YAPP directory.
YD -- Download a file from the YAPP directory.
* ------------ This makes the line after the asterisk a comment.
It can be used to answer the sysop after receiving
a "Message from sysop" line.
WA8BXN MSYS PBBS User's Manual
Version 1.16 December, 1993
Page 15
DEALING WITH TOO MANY BULLETINS
If you live in an area that is served by a good network and
attentive sysops, you may experience bulletin overload. If there
are just too many bulletins coming in, keeping up can be quite a
chore.
For just this reason, a number of commands are designed to
help you. The first command is "LC". This gives you a list of
the different TO fields in the bulletins. You can examine the TO
fields and determine those that interest you.
You can then go to a specialized READ commands to read the
bulletin categories you have selected. "R> xxxx" reads all
bulletins which have the xxxx you entered in the TO field.
Let's say you wanted to check all the DX bulletins on the
bulletin board. You would give the command "LC" and perhaps see
DX, DXING, DXER as some of the categories that cover your
subject. You may then give the command "R DX*". This command
means READ ALL BULLETINS WHICH START WITH THE CHARACTERS "DX" IN
THE TO FIELD. The asterisk means "everything" or "all".
OTHER OVERLOAD HELPERS
You can also read everything from a certain author. You can
use the command "R< KA8ZVV" to read everything from KA8ZVV.
You can read all the bulletins sent to a certain @PBBS. You
can use "R@ ARRL" to read all the bulletins sent to the ARRL
flood route. "R@ ALLBBS" will read all the bulletins going to
the ALLBBS route.
You can also get specific in your LIST commands. You can
"L> YAESU" to see all bulletins sent to YAESU. Of course, you
will miss those bulletin entered by those who own what they think
are "YEASU" owners. The "L> xxxx" command will not correct for
poor spellers!
WA8BXN MSYS PBBS User's Manual
Version 1.16 December, 1993
Page 16
KEEPING LINE LENGTHS LESS THAN 80 CHARACTERS
There are a number of reasons you want to keep the lengths
of your lines less than 80 characters. This will explain why you
need to do this.
Depending on your computer, you may see 80, 60 or even less
characters on your screen. This is not the line length. A line
ends in a carriage return (where you hit the ENTER key). If you
only have carriage returns at the end of your paragraphs, then
your line length is the length of the paragraph.
PBBS EDITORS
Let's say you enter a message into the PBBS but you have
made a mistake. You signed your message in the proper manner,
with the full hierarchial return address, like this: NO8M @
NO8M.OH.USA.NA. But this time, you made a mistake. You entered
your home call wrong, like this: NO8M@NM8O.OH.USA.NA. In these
cases your sysop can edit your message and correct your error.
It is easier than sending the message back to you with a note.
However, the editor on the MSYS PBBS is limited. It will
work with only 80 character lines. This is to limit the code
that is required for the editor. A better editor can be
installed but it would take space better suited to PBBS
functions.
If your line lengths are over 80 characters, your message
would have to be taken to another program and edited. You are
more likely to get it sent back.
SOLUTIONS
USING A TERMINAL PROGRAM
If you are entering a message from a terminal program, hit a
carriage return (the ENTER key) before you send 80 characters.
USING A WORD PROCESSOR
Many word processors will allow you to enter your message
without regard to line-length. This makes editing, spell
checking and other functions easier. They will then have a
special function to allow the file to be saved in an 80 character
per line format.
This file was done in the WordPerfect word processor. It
was saved with carriage returns using the "DOS SAVE" function.
It might help if you can set your word processor to show carriage
returns on the screen. Consult your manual.
WA8BXN MSYS PBBS User's Manual
Version 1.16 December, 1993
Page 17
DON'T GET FANCY
Many newsletter editors watch packet messages for ones they
would like to print. Do not add fancy stuff the messages that
you might want to see printed. It causes additional work to
reformat them into usable text. Do not justify your text.
Justification adds spaces between words to make both margins come
out straight. It is very difficult to edit these extra spaces
out.
Do not indent your whole message. These indentations are a
pain to take out. Add two spaces between sentences. After each
period, question mark, etc., there should be two spaces.
Single space your messages. This saves network time as the extra
carriage return does not need to be sent over and over as the
message gets sent to other boards. Again, the newsletter editors
will not have to remove the extra carriage returns.
The use of capital letters is a questionable practice. Studies
have been done showing that messages in all capital letters are
more difficult to read.
APLINK
Many times, the AMTOR PBBSs, called APLINK, will be used to
send traffic. AMTOR has a very restricted character set. There
are no lower case letters. Many characters, such as "~", "^" and
"_" will be ignored.
PACTOR
MSYS will handle the link direction. There is no need to
worry about the direction. Otherwise, the connect appears much
as it does on a normal packet port.
PROOFREAD YOUR MESSAGES!
After sending a bulletin, read it and see if that is what
you meant it to say and how you meant it to look. After sending
it, use the command "LL" (list last) to get the number and read
it.
EXPERIMENT
You can send messages to yourself. You can then read them
back to see if what you have done is what you wanted to do.
WA8BXN MSYS PBBS User's Manual
Version 1.16 December, 1993
Page 18
NTS BASICS
WHY THE GOOFY FORMAT?
Your message may not stay on the packet network. It may be
forwarded by nets using RTTY, CW, phone or whatever. These other
modes are NOT error free. The preamble and format of your
message will help standardize and check your message for better
handling.
NTS IS PICKY
Danged right, they are! NTS operators want to insure that
the system works now, before the disaster. If they can get you
using the standard now, you will not be a problem later.
Right now you are handling messages that might not mean much
if they don't get to their destination. After a disaster, your
message content may have much more meaning. You may be
transferring messages about critical supply needs, about medical
supplies that will save someone's life. Information to a family
who's relatives assume they are dead.
If you do something wrong while handling NTS traffic, expect
to get corrected. You will be one heck of an asset in a disaster
if you know what you are doing. You will be one heck of a
liability if you don't.
A TYPICAL MESSAGE
| ST 44070 @ NTSOH
| TITLE: North Olmsted, OH (216)777
| Enter message--End with /EX or CTRL-Z
| NR 15 R HXG N8GNJ 4 Seattle, WA 9-18-89 0045Z
| To: Steve Wolf
| North Olmsted, OH
| 216-777-1177
| -bt-
| Request home PBBS call
| -bt-
| Steve N8GNJ, Seattle, WA
| Operator's note: Reply to
| N8GNJ@N8GNJ.WA.USA.NA Seattle, WA
WA8BXN MSYS PBBS User's Manual
Version 1.16 December, 1993
Page 19
Let's examine the above message line by line:
| ST 44070 @ NTSOH
When you send a piece of NTS traffic, it has a special send
command. The traffic indicator will help it on its way. It will
also (sometimes) cause the last PBBS in the line to generate a
message back to you telling you who took it off the packet system
and where. In many cases, this might not be at its destination.
An operator in Iowa might pull an Ohio message because he knows
he can get it there quickly. He might be getting on a net that
has an operator in the town that the message is destined for.
ALWAYS use a ST zip @NTSxx command as all the forwarding PBBSs
will recognize that without interpretation.
| North Olmsted, OH 216-777-1177
This title line tells that there is one message in the
packet message and that it is destined for Ohio. If NOT disaster
related, there may be many messages in the packet messages, as
long as they are destined for the same location. The inclusion
of an area code (AC 216) is sometimes used but does not mean
diddley in many areas. If the precedence (explained below) is
EMERGENCY or P, then that could be added to the title line. The
title line is limited to 37 characters!
| NR 15 R HXG N8GNJ 4 Seattle, WA 9-18-89 0045Z
This is the preamble. NR 15 is the number of the message at
the sender's station. On January 1, you start with message one.
You assign each message going out of your station a number.
"R" is ROUTINE. Other precedents are "W"elfare, "P"riority and
"EMERGENCY". EMERGENCY is always spelled out! Any precedents
other than routine should appear in the title line.
"EMERGENCY" deals with information related to the safety of life
and property. "Priority" is everything that is almost an
emergency. It includes important messages having a time limit,
notices of death and injury in a disaster area and press
dispatches. "Welfare" is for health and welfare inquiries and
responses that indicate all is well. If all is not well, the
message should be sent as Priority. "Routine" is everything
else.
WA8BXN MSYS PBBS User's Manual
Version 1.16 December, 1993
Page 20
The HX- is the handling instructions (if any). Handling
instructions are rarely used.
HXA# -- Collect call within # miles (or unlimited if no #).
HXB# -- Cancel in # hours/notify originator.
HXC -- Report time and date of delivery.
HXD -- Report time, date, method and call delivering.
HXE -- Obtain and send reply.
HXF# -- Hold message until # (date).
HXG -- Mail or toll call delivery not required.
The number five is the check of the message. It is how many
words you are sending. The stop character, the "x", is counted.
The rest of the line is self-explanatory. For gosh sakes, use
UTC! There are other people in the world and they don't all use
EDST!
| To: Steve Wolf
| North Olmsted, OH
| 216-777-1177
This is the address that the message is to go to. The phone
number is almost always mandatory. It will probably just be
serviced back without it.
| -
| -bt-
| Request home PBBS call
| -bt-
The meat, the message. Preceded and followed by a -bt- to
set it off, the message should be no longer than 19 words.
Rambling messages do not make it!
| Steve N8GNJ, Seattle, WA
| Operator's note: Reply to
| N8GNJ@N8GNJ.WA.USA.NA Seattle, WA
This is the signature, to whom a response is to be
forwarded. It is a real good idea to add your packet address to
the end.
CHECKS--COUNTING THE WORDS
If you are going to run into trouble, this is where it will
be. Probably the best available advise is to not banter on the
air about disagreements over the check. If they know more than
you, they are right. If they know less, they are wrong.
WA8BXN MSYS PBBS User's Manual
Version 1.16 December, 1993
Page 21
Here is a quick list of some sticky check situations:
Alfred E. Neumann 3 words
Grand Cayman 2 words
NY 1 word
New York City 3 words
ARL SIXTY THREE 3 words
Fifty Six 2 words
6146B 1 word
You can change an improper check. DON'T CHANGE THE WORDING!
If you do change the check, use a slant bar between the old
and new values. For example, if you received a check of five and
the check should be seven, note it 5/7.
ARRL NUMBERED RADIOGRAMS
These are "standard" messages. The text of the message is
simply ARL followed by the number spelled out: ARL SIXTY EIGHT.
It allows the operator to quickly make up standard "are you OK"
and the like type messages. There should be a file on your board
describing all the different ARL numbers.
The one seen in a disaster situation is ARL NINETEEN. Here
is an example:
| NR 132 W NO8M ARL 2 N. OLMSTED, OH AUG 5
| JANE DOE
| 1234 WEST 5TH
| GARY, IN
| PHONE 123-456-7890
| ARL NINETEEN
| JOHN SMITH 987-654-3210
| OR REPLY NO8M@NO8M.OH.USA.NA
(Note that this message could be sent either to Jane Doe, a
person in the disaster area, or to an agency who could follow it
up. For example, it could be addressed to the American Red Cross
agency in the area with the text requesting a check on the
person.)
DO NOT BOOK DISASTER TRAFFIC!
Booking traffic is sending a number of messages with the
same information in one message. The stations in a disaster area
do not have the time to separate them.
WA8BXN MSYS PACKET BBS COMMAND SUMMARY ... Version 1.16
=======================================================
Abort..........Stop current action PC........Request a callsign
Bye............Disconnect Read...........Read a message
Conference.....Multi-user\DX Node R x ......Read all catagory x
^ZH.......Conference help R@ xxxx...Read all at xxxx BBS
^ZQ.......Return to PBBS R> xxxx...Read all to xxxx
^ZU.......List users R< xxxx...Read all from xxxx
^ZA #.....Invite user on # RM........Read Mine
Download.......Download from FILES RE........Read for export
Grep...........String search file RH........Read with headers
Help...........Help RN........Read only text
Information....PBBS hardware RP........W/O mark as read
ID.............Port definitions Send...........Send a message
Just Heard.....Log ^A.........Abort message
JB........BBS Stations CC.........Carbon copy
J.........Digipeaters REPly #....Reply auto title
J........Gateways SP.........Send personal
JK........K and KA nodes ST.........Send traffic
JM........MSYS PBBSs SB.........Send bulletin
JN........Net/Rom Talk...........Page sysop
JT........TCP/IP protocol Users..........Users
Kill...........Kill a message Version........Version
KM........Kill mine What...........Download list
KT........Kill traffic W x.......What in x=subdir
List...........Message headers eXpert.........Toggle expert
L x.......List catagory x X #.......Lines per page
LC........List catagories XC........Toggle catagory
LM........List mine XF........Multiple lines
LN........List not read XR........Toggle reply
LT........List traffic XS........1 line per reply
LL........List last message Yapp...........Down and uploads
LL #......List last # YW........YAPP Directory
LO #......List older #=yymmdd YD........Download a file
LU........List unread to you YU........Upload a file
LY........List read to you * .............Comment to sysop
LW........List weather
L?........List ? forward NETWORK NODE COMMANDS
L<< x.....List fm x=callsign BBS............Connect to the PBBS
L>> x.....List to x=callsign Bye............Disconnect
L@ PBBS...Messages to PBBS Connect CALL...Connect to call
L #.......List since # C# CALL...C on port # to call
LL #......List last # Help...........Help
L # #.....List from # to # Info...........Basic Information
L"x"......List with x=string Justheard......Limited output JH
L'x'......List with x=sTrInG K-Nodes........K-Node output.....
L$........List bulletins Nodes..........Nodes heard
Message........Message of the day Nodes CALL..Info on node
Name...........First name Ports..........Port information
NH........Home board Routes.........Direct connect nodes
NQ........QTH=City, State Route CALL..Other node
NZ........Zip code Talk...........Page Sysop
Users..........Users/nodes
Path...........Path to a user
PF........Path to a PBBS Version 1.16 December 1993
